type: position_score
table:
  filename: ENCFF417RQZ.tabix.bed.gz
  header_mode: none
  zero_based: true
  format: tabix
  chrom:
    column_index: 0
  pos_begin:
    column_index: 1
  pos_end:
    column_index: 2
scores:
- id: TF_ChIP-seq_ENCSR220YXI
  column_index: 3
  type: float
  desc: signal
  histogram:
    type: number
    number_of_bins: 100
meta:
  summary: 'ChIP-seq ENCSR220YXI [TISSUE: Homo sapiens K562, TARGET: PRPF4]'
  description: "**status**: released\n\n**biological\\_replicates**: Rep 1, Rep 2\n\
    \n**summary**: \n\n**output\\_type**: optimal IDR thresholded peaks\n\n**audit\\\
    _internal\\_action**: Released analysis {ENCAN027EIN|/analyses/ENCAN027EIN/} has\
    \ in progress subobject quality standard {encode3-tf-chip|/quality-standards/encode3-tf-chip/}\n\
    \n**audit\\_internal\\_action**: File {ENCFF417RQZ|/files/ENCFF417RQZ/} with status\
    \ 'released' is derived from file {ENCFF419RSJ|/files/ENCFF419RSJ/} with status\
    \ 'archived'.\n\n**audit\\_not\\_compliant**: Processed alignments file {ENCFF367OYT|/files/ENCFF367OYT/}\
    \ processed by ChIP-seq ENCODE3 GRCh38 pipeline has 9201205 usable fragments.\
    \ The minimum ENCODE standard for each replicate in a ChIP-seq experiment targeting\
    \ PRPF4-human and investigated as a transcription factor is 10 million usable\
    \ fragments. The recommended value is > 20 million, but > 10 million is acceptable.\
    \ (See {ENCODE ChIP-seq data standards|/data-standards/chip-seq/} )\n\n**audit\\\
    _not\\_compliant**: NRF (Non Redundant Fraction) is equal to the result of the\
    \ division of the number of reads after duplicates removal by the total number\
    \ of reads. An NRF value in the range 0 - 0.5 is poor complexity, 0.5 - 0.8 is\
    \ moderate complexity, and > 0.8 high complexity. NRF value > 0.8 is recommended,\
    \ but > 0.5 is acceptable. ENCODE processed alignments file {ENCFF367OYT|/files/ENCFF367OYT/}\
    \ processed by ChIP-seq ENCODE3 GRCh38 pipeline was generated from a library with\
    \ NRF value of 0.15.\n\n**audit\\_not\\_compliant**: PBC1 (PCR Bottlenecking Coefficient\
    \ 1, M1/M\\_distinct) is the ratio of the number of genomic locations where exactly\
    \ one read maps uniquely (M1) to the number of genomic locations where some reads\
    \ map (M\\_distinct). A PBC1 value in the range 0 - 0.5 is severe bottlenecking,\
    \ 0.5 - 0.8 is moderate bottlenecking, 0.8 - 0.9 is mild bottlenecking, and >\
    \ 0.9 is no bottlenecking. PBC1 value > 0.9 is recommended, but > 0.8 is acceptable.\
    \ ENCODE processed alignments file {ENCFF367OYT|/files/ENCFF367OYT/} processed\
    \ by ChIP-seq ENCODE3 GRCh38 pipeline was generated from a library with PBC1 value\
    \ of 0.24.\n\n**audit\\_not\\_compliant**: NRF (Non Redundant Fraction) is equal\
    \ to the result of the division of the number of reads after duplicates removal\
    \ by the total number of reads. An NRF value in the range 0 - 0.5 is poor complexity,\
    \ 0.5 - 0.8 is moderate complexity, and > 0.8 high complexity. NRF value > 0.8\
    \ is recommended, but > 0.5 is acceptable. ENCODE processed alignments file {ENCFF895DLK|/files/ENCFF895DLK/}\
    \ processed by ChIP-seq ENCODE3 GRCh38 pipeline was generated from a library with\
    \ NRF value of 0.15.\n\n**audit\\_not\\_compliant**: PBC1 (PCR Bottlenecking Coefficient\
    \ 1, M1/M\\_distinct) is the ratio of the number of genomic locations where exactly\
    \ one read maps uniquely (M1) to the number of genomic locations where some reads\
    \ map (M\\_distinct). A PBC1 value in the range 0 - 0.5 is severe bottlenecking,\
    \ 0.5 - 0.8 is moderate bottlenecking, 0.8 - 0.9 is mild bottlenecking, and >\
    \ 0.9 is no bottlenecking. PBC1 value > 0.9 is recommended, but > 0.8 is acceptable.\
    \ ENCODE processed alignments file {ENCFF895DLK|/files/ENCFF895DLK/} processed\
    \ by ChIP-seq ENCODE3 GRCh38 pipeline was generated from a library with PBC1 value\
    \ of 0.31.\n\n**audit\\_warning**: Processed alignments file {ENCFF895DLK|/files/ENCFF895DLK/}\
    \ processed by ChIP-seq ENCODE3 GRCh38 pipeline has 10396655 usable fragments.\
    \ The minimum ENCODE standard for each replicate in a ChIP-seq experiment targeting\
    \ PRPF4-human and investigated as a transcription factor is 10 million usable\
    \ fragments. The recommended value is > 20 million, but > 10 million is acceptable.\
    \ (See {ENCODE ChIP-seq data standards|/data-standards/chip-seq/} )\n\n**audit\\\
    _warning**: PBC2 (PCR Bottlenecking Coefficient 2, M1/M2) is the ratio of the\
    \ number of genomic locations where exactly one read maps uniquely (M1) to the\
    \ number of genomic locations where two reads map uniquely (M2). A PBC2 value\
    \ in the range 0 - 1 is severe bottlenecking, 1 - 3 is moderate bottlenecking,\
    \ 3 - 10 is mild bottlenecking, > 10 is no bottlenecking. PBC2 value > 10 is recommended,\
    \ but > 3 is acceptable. ENCODE processed alignments file {ENCFF367OYT|/files/ENCFF367OYT/}\
    \ processed by ChIP-seq ENCODE3 GRCh38 pipeline was generated from a library with\
    \ PBC2 value of 2.60.\n\n**audit\\_warning**: PBC2 (PCR Bottlenecking Coefficient\
    \ 2, M1/M2) is the ratio of the number of genomic locations where exactly one\
    \ read maps uniquely (M1) to the number of genomic locations where two reads map\
    \ uniquely (M2). A PBC2 value in the range 0 - 1 is severe bottlenecking, 1 -\
    \ 3 is moderate bottlenecking, 3 - 10 is mild bottlenecking, > 10 is no bottlenecking.\
    \ PBC2 value > 10 is recommended, but > 3 is acceptable. ENCODE processed alignments\
    \ file {ENCFF895DLK|/files/ENCFF895DLK/} processed by ChIP-seq ENCODE3 GRCh38\
    \ pipeline was generated from a library with PBC2 value of 3.29."
  labels:
    reference_genome: hg38/genomes/GRCh38-hg38
    accession: ENCSR220YXI
    status: released
    assay_term_name: ChIP-seq
    simple_biosample_summary: ''
    biosample_summary: Homo sapiens K562
    replication_type: isogenic
    biosample_ontology: /biosample-types/cell_line_EFO_0002067/
    perturbed: false
    doi: 10.17989/ENCSR220YXI
    date_created: '2014-11-27T18:22:34.055575+00:00'
    date_released: '2017-03-07'
    submitter_comment: As of March 2nd, 2017, the lab has submitted updated fastqs,
      requiring new alignments.
    target: PRPF4