type: position_score
table:
  filename: ENCFF455YMK.tabix.bed.gz
  header_mode: none
  zero_based: true
  format: tabix
  chrom:
    column_index: 0
  pos_begin:
    column_index: 1
  pos_end:
    column_index: 2
scores:
- id: TF_ChIP-seq_ENCSR128IYN
  column_index: 3
  type: float
  desc: signal
  histogram:
    type: number
    number_of_bins: 100
meta:
  summary: 'ChIP-seq ENCSR128IYN [TISSUE: Homo sapiens HepG2, TARGET: SNRNP70]'
  description: "**status**: released\n\n**biological\\_replicates**: Rep 1, Rep 2\n\
    \n**summary**: \n\n**output\\_type**: IDR thresholded peaks\n\n**audit\\_internal\\\
    _action**: Released analysis {ENCAN747UZF|/analyses/ENCAN747UZF/} has in progress\
    \ subobject document {8987c1b3-273a-42f5-87da-73689bce75fb|/documents/8987c1b3-273a-42f5-87da-73689bce75fb/}\n\
    \n**audit\\_internal\\_action**: Released analysis {ENCAN747UZF|/analyses/ENCAN747UZF/}\
    \ has in progress subobject quality standard {encode4-tf-chip|/quality-standards/encode4-tf-chip/}\n\
    \n**audit\\_warning**: Processed alignments file {ENCFF153VGR|/files/ENCFF153VGR/}\
    \ processed by ChIP-seq ENCODE4 v1.6.1 GRCh38 pipeline has 13127933 usable fragments.\
    \ The minimum ENCODE standard for each replicate in a ChIP-seq experiment targeting\
    \ SNRNP70-human and investigated as a transcription factor is 10 million usable\
    \ fragments. The recommended value is > 20 million, but > 10 million is acceptable.\
    \ (See {ENCODE ChIP-seq data standards|/data-standards/chip-seq/} )\n\n**audit\\\
    _warning**: Processed alignments file {ENCFF449TKN|/files/ENCFF449TKN/} processed\
    \ by ChIP-seq ENCODE4 v1.6.1 GRCh38 pipeline has 16311485 usable fragments. The\
    \ minimum ENCODE standard for each replicate in a ChIP-seq experiment targeting\
    \ SNRNP70-human and investigated as a transcription factor is 10 million usable\
    \ fragments. The recommended value is > 20 million, but > 10 million is acceptable.\
    \ (See {ENCODE ChIP-seq data standards|/data-standards/chip-seq/} )\n\n**audit\\\
    _warning**: PBC1 (PCR Bottlenecking Coefficient 1, M1/M\\_distinct) is the ratio\
    \ of the number of genomic locations where exactly one read maps uniquely (M1)\
    \ to the number of genomic locations where some reads map (M\\_distinct). A PBC1\
    \ value in the range 0 - 0.5 is severe bottlenecking, 0.5 - 0.8 is moderate bottlenecking,\
    \ 0.8 - 0.9 is mild bottlenecking, and > 0.9 is no bottlenecking. PBC1 value >\
    \ 0.9 is recommended, but > 0.8 is acceptable. ENCODE processed alignments file\
    \ {ENCFF153VGR|/files/ENCFF153VGR/} processed by ChIP-seq ENCODE4 v1.6.1 GRCh38\
    \ pipeline was generated from a library with PBC1 value of 0.87.\n\n**audit\\\
    _warning**: PBC2 (PCR Bottlenecking Coefficient 2, M1/M2) is the ratio of the\
    \ number of genomic locations where exactly one read maps uniquely (M1) to the\
    \ number of genomic locations where two reads map uniquely (M2). A PBC2 value\
    \ in the range 0 - 1 is severe bottlenecking, 1 - 3 is moderate bottlenecking,\
    \ 3 - 10 is mild bottlenecking, > 10 is no bottlenecking. PBC2 value > 10 is recommended,\
    \ but > 3 is acceptable. ENCODE processed alignments file {ENCFF153VGR|/files/ENCFF153VGR/}\
    \ processed by ChIP-seq ENCODE4 v1.6.1 GRCh38 pipeline was generated from a library\
    \ with PBC2 value of 7.75.\n\n**audit\\_warning**: NRF (Non Redundant Fraction)\
    \ is equal to the result of the division of the number of reads after duplicates\
    \ removal by the total number of reads. An NRF value in the range 0 - 0.5 is poor\
    \ complexity, 0.5 - 0.8 is moderate complexity, and > 0.8 high complexity. NRF\
    \ value > 0.8 is recommended, but > 0.5 is acceptable. ENCODE processed alignments\
    \ file {ENCFF449TKN|/files/ENCFF449TKN/} processed by ChIP-seq ENCODE4 v1.6.1\
    \ GRCh38 pipeline was generated from a library with NRF value of 0.74.\n\n**audit\\\
    _warning**: PBC1 (PCR Bottlenecking Coefficient 1, M1/M\\_distinct) is the ratio\
    \ of the number of genomic locations where exactly one read maps uniquely (M1)\
    \ to the number of genomic locations where some reads map (M\\_distinct). A PBC1\
    \ value in the range 0 - 0.5 is severe bottlenecking, 0.5 - 0.8 is moderate bottlenecking,\
    \ 0.8 - 0.9 is mild bottlenecking, and > 0.9 is no bottlenecking. PBC1 value >\
    \ 0.9 is recommended, but > 0.8 is acceptable. ENCODE processed alignments file\
    \ {ENCFF449TKN|/files/ENCFF449TKN/} processed by ChIP-seq ENCODE4 v1.6.1 GRCh38\
    \ pipeline was generated from a library with PBC1 value of 0.73.\n\n**audit\\\
    _warning**: PBC2 (PCR Bottlenecking Coefficient 2, M1/M2) is the ratio of the\
    \ number of genomic locations where exactly one read maps uniquely (M1) to the\
    \ number of genomic locations where two reads map uniquely (M2). A PBC2 value\
    \ in the range 0 - 1 is severe bottlenecking, 1 - 3 is moderate bottlenecking,\
    \ 3 - 10 is mild bottlenecking, > 10 is no bottlenecking. PBC2 value > 10 is recommended,\
    \ but > 3 is acceptable. ENCODE processed alignments file {ENCFF449TKN|/files/ENCFF449TKN/}\
    \ processed by ChIP-seq ENCODE4 v1.6.1 GRCh38 pipeline was generated from a library\
    \ with PBC2 value of 3.53."
  labels:
    reference_genome: hg38/genomes/GRCh38-hg38
    accession: ENCSR128IYN
    status: released
    assay_term_name: ChIP-seq
    simple_biosample_summary: ''
    biosample_summary: Homo sapiens HepG2
    replication_type: isogenic
    biosample_ontology: /biosample-types/cell_line_EFO_0001187/
    perturbed: false
    doi: 10.17989/ENCSR128IYN
    date_created: '2017-01-25T23:24:42.787432+00:00'
    date_released: '2017-02-27'
    submitter_comment: ''
    target: SNRNP70